|
Yongkang Huayue Import & Export Co. Ltd.
|
Product (78)
- Gasoline Chain Saw (6)
- Gasoline Brush Cutter (33)
- Gasoline Hedge Trimmer (5)
- Earth Auger (4)
- Power Tool (2)
- Garden Tool Parts (28)
Knowledge (8)
Blog (4)
Why Us (6)
Certificates (7)
Credit Report
Products Index
Company Info
Yongkang Huayue Import & Export Co. Ltd. [China (Mainland)]
Business Type:Manufacturer, Trading Company
City: Jinhua
Province/State: Zhejiang
Country/Region: China (Mainland)
|
wowyaehtools:
|
Knowledge
1 Engine
2 Auger bit
3 Handle
4 Recoil starter (easy start)
5 Fuel tank
6 Exhaust
7 Throttle trigger
8 Stop/Run switch
9 Fuel mixing bottle
10 Spanner
11 Hex keys
12 Spark plug wrench
13 Spark plug
Fuel mixture
GAS | OIL | RATIO |
40ml | 1ml | 40:1 |
80ml | 2ml | 40:1 |
600ml | 15ml | 40:1 |
2) Fill certified fuel container 1/4 full of
recommended fuel
3) Add recommended amount 2 stroke oil
4) Screw container cap on straight and tight.
5) Shake the container to mix the fuel and oil
6) Unscrew gas cap slowly to the vent, add the remainder of fuel requirements.
7) Wipe away any spilled fuel or oil and allow
to evaporate before moving or transporting.
Warning! Do not mix the fuel in the fuel tank.
Filling the fuel tank
Using a suitable funnel to transfer the fuel.
Please note that for safety reasons this product has been supplied with the fuel system completely drained of fuel and the engine will require "running in".
Using a suitable funnel to transfer the fuel.
mixed from the container to the fuel tank, take care not to spill any fuel or over fill the fuel tank
When starting for the first time, you may experience a little difficult. Once the fuel has fully circulated through the system the engine will start and future starting will be easier.
Operating the earth auger
1. Make sure the operation of the earth auger does not involve the risk of contact with
electric cables, gas mains, water pipes etc.
2. Inspect the work area before starting.
3. Remove all objects or debris which could be thrown, jammed or become entangled to the auger.
4. Adopt a stable stance always keeping the earth auger in front of your body.
5. Grip the handles with both hands to ensure you can safety operate the tool.
Allow the auger to reach full speed before commencing the boring operation. If the auger hits a stone, hard ground etc., the rotation may stop immediately and give a hard torque reaction. And this is why needs two hands to grip the handles.
Storage
Stored the earth drill
1. Drain all the fuel from the fuel tank and the carburetor.
2. To ensure all the fuel has been removed, remove the spark plug and pour approximately one tablespoon full of clean engine oil into the spark plug hole,
3. The ignition turned OFF gently pull on the recoil starter cord several times.
4. Re-fit the spark plug continue to pull the recoil starter cord until the piston is on the compression stroke (when resistance is felt) then stop pulling.
